Set Up A Dynamic Dns Service Account; Create Static Routes - TP-Link SR20 User Manual

Chapter 4

4. 10. 3. Set Up a Dynamic DNS Service Account

Most ISPs (Internet service providers) assign a dynamic IP address to the router and
you can use this IP address to access your router remotely. However, the IP address
can change any time and you don't know when it changes. In this case, you might need
the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your
friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in
no need of checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.0.x) to the router.
To set up DDNS, please follow the instructions below:
1. Visit http://tplinkwifi.net, and log in with your Kasa account.
2. Go to Advanced
3. Select the Service Provider
4. If you choose the DDNS service, you should log in with your DDNS account, select a
service provider and click
name of the account (such as lisa.ddns.net).
5. Click LOGIN AND
Tips: If you want to use a new DDNS account, please logout first, then log in with the new account.

4. 10. 4. Create Static Routes

A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal internet usage does not require this
setting to be configured.
I want to:
> Network > Dynamic DNS.
(NO-IP, Dyndns and many other DNS services).
Go to register. Enter the username, password and domain
SAVE.
Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the internet, but I
also want to visit my company's server. Now I have a switch and
Advanced Functions on Web Management Page
70