TP-Link SR20 User Manual page 54

Chapter 4
DoS Protection can protect your home network against DoS attacks from flooding your
network with server requests. Follow the steps below to configure DoS Protection.
1. Visit http://tplinkwifi.net, and log in with your Kasa account.
2. Go to Advanced
3. Enable DoS Protection.
4. Set the level (Off, Low,
UDP-Flood Attack Filtering
• ICMP-Flood Attack Filtering
Message Protocol) flood attack.
• UDP-Flood Attack Filtering
Protocol) flood attack.
• TCP-SYN-Flood-Attack Filtering
Control Protocol-Synchronize) flood attack.
• Enable Ingore Ping Packet From WAN/LAN Port
LAN Port if necessary.
5. Click SAVE.
Tips:
1. The level of protection is based on the number of traffic packets. Specify the level at
> System Parameters.
> Security > Settings
Middle or High) of protection for
and TCP-SYN-Flood Attack
- Enable to prevent the ICMP (Internet Control
- Enable to prevent the UDP (User Datagram
- Enable to prevent the TCP-SYN (Transmission
Advanced Functions on Web Management Page
> DoS Protection.
ICMP-Flood Attack
Filtering.
or Forbid Ping Packet From
Filtering,
Advanced > System Tools
55