Chapter 4
you can configure your router to permit IPv6 connection.
1. Visit http://tplinkwifi.net, and log in with your Kasa account.
2. Go to
Advanced
3. Select the internet connection type provided by ISP. Fill in the information as
required.
Note:
If you do not know what your internet connection type is, contact your ISP or judge according to the information
provided by your ISP.
•
Static IP:
Select this type if your ISP uses Static IPv6 address assignment. Fill in
the parameters as provided by the ISP.
•
Dynamic IP:
Click Advanced to have more configuration if ISP requires.
•
PPPoE:
Select this type if your ISP uses PPPoEv6 and provides a username and
password. Fill in the Username and Password. Click Advanced to have more
configuration if ISP requires.
•
6to4 Tunnel:
address. An IPv4 internet connection type is a prerequisite for this connection
type. Click Advanced to have more configuration if ISP requires.
•
Pass-Through (Bridge):
network deployment for assigning address. No configuration is required for
this type of connection.
4. Configure
LAN
ports. Windows users are recommended to choose from the first
two types. Fill in Address Prefix provided by ISP, and click SAVE.
>
IPV6
to enable IPV6 connection.
Select this type if your ISP uses Dynamic IPv6 address assignment.
Select this type if your ISP uses 6to4 deployment for assigning
Select this type if your ISP uses Pass-Through (Bridge)
Advanced Functions on Web Management Page
61