Alcatel-Lucent 7210 SAS M Basic System Configuration Manual page 303

Output System Information Output — The following table describes the system information output
fields.
7210 SAS M, X Basic System Configuration Guide
Label
System Name
System Contact
System Location
System Coordi-
nates
System Up Time
SNMP Port
SNMP Engine ID
SNMP Max Message
Size
SNMP Admin State
SNMP Oper State
SNMP Index Boot
Status
Telnet/SSH/FTP
Admin
Telnet/SSH/FTP
Oper
BOF Source
Image Source
The configured system name.
A text string that describes the system contact information.
A text string that describes the system location.
A text string that describes the system coordinates.
The time since the last boot.
The port number used by this node to receive SNMP request messages
and to send replies.
The SNMP engineID to uniquely identify the SNMPv3 node.
The maximum SNMP packet size generated by this node.
Enabled — SNMP is administratively enabled and running.
Disabled — SNMP is administratively shutdown and not running.
Enabled — SNMP is operationally enabled.
Disabled — SNMP is operationally disabled.
Persistent — System indexes are saved between reboots.
Not Persistent — System indexes are not saved between
reboots.
Displays the administrative state of the Telnet, SSH, and FTP sessions.
Displays the operational state of the Telnet, SSH, and FTP sessions.
The location of the BOF.
Primary — Indicates that the directory location for runtime image
file was loaded from the primary source.
Secondary — Indicates that the directory location for runtime
image file was loaded from the secondary source.
Tertiary — Indicates that the directory location for runtime image
file was loaded from the tertiary source.
System Management
Description
Page 303