Checking The Clutch Pressure Plate; Checking The Clutch Push Rod #2; Checking The Primary Driven Gear - Yamaha Sirius T110LSE Service Manual

CLUTCH
EAS00286
CHECKING THE CLUTCH PRESSURE
PLATE
1. Check:
9clutch pressure plate
Cracks/damage → Replace.
EAS00288
CHECKING THE CLUTCH PUSH ROD
#2
1. Check:
9clutch push rod #2
Cracks/damage/wear → Replace the clutch
push rod #2.
2. Measure:
9clutch push rod #2 bending limit
Out of specification → Replace the clutch
push rod #2.
Clutch push rods bending limit
0.5 mm (0.0197 in)
EAS00292
CHECKING THE PRIMARY DRIVEN
GEAR
1. Check:
9primary drive gear
(on the clutch shoe housing)
9primary driven gear
(on the clutch housing)
Damage/wear → Replace the clutch shoe
housing and clutch housing as a set.
Excessive
Replace the clutch shoe housing and clutch
housing as a set.
4-53
ENG
noise during operation
→