Back Panel - Buffalo AIRSTATION WHR-1166D User Manual

Back Panel

1
Mode Switch
This switch changes between router mode and bridge (access point) mode. Auto mode will enable or disable
router functionality automatically.
2
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub supports 10 Mbps and
100 Mbps connections.
3
Internet Port
10 Mbps, 100 Mbps and 1000Mbps connections are supported.
Note: In bridge (access point) mode, the Internet port becomes a regular LAN port, for a total of 5 usable LAN ports.
4
Reset Button
To reset all settings, hold down this button until the power/diag LED turns red (about 3 seconds). The power must
be on for this to work.
5
DC Connector
Connect the included AC adapter here.
4