Chapter 1 Product Overview
Back Panel
6
9
6
Router Switch
On:
Off :
Auto:
7
LAN Port
8
Internet Port
9
Reset button
10
DC connector
7
8
10
Router functionality is enabled (router mode).
Router functionality is disabled (bridge/AP mode).
This switches between modes automatically based on whether or not
another router is detected on the Internet port. The default setting for
this switch is Auto.
Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps and 100 Mbps connections.
10 Mbps and 100 Mbps connections are supported.
Note: In bridge/AP mode (router off ), the Internet port becomes a
regular LAN port, for a total of 5 usable LAN ports.
To reset all settings, hold down this button until the Power LED turns red
(about 3 seconds). The power must be on for this to work.
Connect the included AC adapter here.
- 8 -