Back Panel - Buffalo Nfiniti WHR-HP-GN User Manual

Chapter 1 Product Overview

Back Panel

6
7
9
10
INTERNET Port
11
DC Connector
WHR-HP-GN User Manual
6
ROUTER SWITCH
Switches router mode between enabled, disabled, and auto.
On:
Off:
Auto:
7
POWER LED (Green)
8
On:
Flashing: An Ethernet device is communicating.
8
LAN Port
Connect your computer, hub, or other Ethernet devices to
these ports. This switching hub supports 10Mb/s and 100Mb/s
connections.
10
9
INTERNET LED (Green)
11
On:
Flashing: The Internet port is transmitting data.
10Mb/s and 100Mb/s connections are supported.
Note: In bridge/AP mode (router switch off ), the Internet port becomes a
regular LAN port, for a total of 5 usable LAN ports. .
Connect the included AC adapter.
Router functionality is enabled (router mode).
Router functionality is disabled (bridge/AP mode).
This switches between modes automatically based
on whether or not another router is detected on the
Internet port. The default setting for this switch is
Auto.
An Ethernet device is connected.
The Internet port is connected.
10