Remote Control (Mode 1 Or Mode 2) - Proxima Pro AV 9400L User Manual

REMOTE CONTROL (Mode 1 or Mode 2)

This projector can be received two types signal from the remote control unit.
One of the type is used the normal code (Mode 1), other is used expand
code (Mode 2).
Turn REMOTE CONTROL function Mode 2 in the SETTING menu. The
projector can be received the expand cord.
Change of the signal mode in the remote control unit
Press the "MENU" and "NORMAL" button on the remote control unit for 10
seconds simultaneously. And now changed the signal mode.
Setting the Blue back, Display, Reverse T/B, Reverse R/L, Split wipe,
Power management, USB and Remote control
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON.
Another dialog box SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to an item you want to set by pressing the POINT UP/DOWN BUTTON(s).
5. If you want to change the setting, press the SELECT (REAR CLICK) BUTTON.
6. To quit the MENU, point to Quit and then press the SELECT (REAR CLICK) BUTTON.
7. The settings are permanently kept even if the MAIN ON/OFF is switched off.
MAIN MENU DISPLAY
SETTING
DISPLAY
OTHER FUNCTION SETTING
PROJECTOR
Press the SELECT
(REAR CLICK) BUTTON.
Mode 1
REMOTE CONTROL UNIT
Press the
"MENU" and "NORMAL" BUTTONS.
Mode 1
Mode 2
Mode 2
51