Using The Projector; Remote Control - Proxima SVGA User Manual

USER GUIDE

8 USING THE PROJECTOR

The projector has a set of features and functions you should familiarize with
in order to get the most out of using the unit.
8.1

REMOTE CONTROL

The remote control is used to adjust the projector for the best possible
image, either directly or through the menu system. It is also used during
presentations for computer mouse control and with special presentation
tools.
The remote control may be pointed directly at the projector
front or rear, where the receivers are situated, or indirectly
by pointing at the projection screen. When pointing at the
screen, point at an angle that reflects the beam towards the
projector. The remote control can also be physically
connected to the projector using an optional cable with
standard 2.5 mm mini-jack connectors.
Bottom Key
(Drag)
The trackball is by default controlling the computer mouse (if the mouse
cable is connected properly). With some functions, like POINTER, MASK
and in the menu system, the mouse control is disabled
LED Indicator
Light Key
Left Key
(Enter)
Right Key
18
SVGA LCD PROJECTOR
Wire
connection
ON/OFF
Switch
Trackball