Proxima DP8200x User Manual page 8

Connector Panel
The projector provides three computer and three video connectors:
• one M1-D (HD, DVI, and computer)
• two VESA (HD, HD component, and computer)
• one component RCA
• one S-video
• one composite RCA
• one USB mouse (for use with the Computer 2 input only)
• one PS/2 mouse (for use with the Computer 3 input only)
It also has an RS-232 serial connector for serial control and an RJ-45 connec-
tor for networked control via ProjectorNet software. The Command Line
Interface (CLI) specifications and commands are on our website.
A 2.5 mm mini-jack trigger provides a 12 volt DC output. It provides a con-
stant output while the projector is on. If you connect your projection screen
to the trigger with an optional cable, when you turn on the projector the
screen will move down; when you turn the projector off, the screen will
return to the storage position. You must turn this feature on in the System
menu to use it. See page 34.
component video
external
PS/2
speakers mouse
(audio out) s-video
RJ-45
network PS/2
I
O
composite
power switch
video
power
connector
screen trigger connection
+12v
2.5mm mono plug
6
M1-D computer
USB computer
monitor
mouse audio
audio in
R
monitor out
computer 2
computer 1
USB
L
computer 3 serial control
audio in
computer in
RS232 serial control
VESA computers
ground
to screen relay (see screen manufacturer
for details)
screen
trigger
trigger
lock