AVIOTEC IP starlight 8000
Caution!
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must
!
be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power
Source).
The camera can be supplied with a power supply in case of missing PoE feature of the
network or for redundancy reasons.
Connect an approved power supply unit with a rated supply voltage of 12 VDC as follows:
1.
2.
3.
Bosch Sicherheitssysteme GmbH
Strip back 5 mm (0.2 in) of insulation on the power supply cable (must be 16-22 AWG
stranded wire or 16-26 AWG solid wire).
Loosen the screws of the supplied 2-pole connector and insert the stripped wires, then
tighten the screws again.
Insert the 2-pole connector into the camera power socket.
Operation Manual
Installation | en
27
2016.02 | 1.0 | F.01U.318.200