Wiring Of The Camera - Bosch AVIOTEC IP starlight 8000 Operation Manual

26 en | Installation
5.4

Wiring of the camera

Connection to Ethernet via PoE Ethernet cable
Notice!
Use only PoE approved devices.
The camera is intended to be powered via a STP Category 5e cable in a Power-over-Ethernet
(PoE) network environment . This is the default power supply.
1.
2.
P
Auxilliary 12 V DC power supply
Caution!
Use only a +12 VDC power supply as an auxiliary power source.
!
The auxiliary power supply unit must be isolated from earth.
2016.02 | 1.0 | F.01U.318.200
Connect the camera to a 10/100 Base-T network.
Use STP Category 5e cable with RJ45 connectors (the camera network socket is Auto
MDIX compliant).
The LEDs beside the Ethernet connection indicate network connection (green lit) and IP
traffic (orange flashing).
Operation Manual
AVIOTEC IP starlight 8000
Bosch Sicherheitssysteme GmbH