Rear Wheel Rim Runout Inspec­tion; Final Driven Sprocket Inspection; Rear Wheel Disassembly - Honda MBX50 Workshop Manual

aHONDA
� MBX50· MBX80
REAR WHEEL RIM RUNOUT INSPEC­
TION
Check the rim for runout by placing the wheel in a
truing stand. Spin the wheel by hand and read the
runout using a dial indicator gauge.
SERVICE LIMITS:
Radial: 2.0 mm (0.08 in)
Axial: 2.0 mm (0.08 in)
NOTE
I Do not attempt to repair the spokes.

FINAL DRIVEN SPROCKET INSPECTION

Check the final driven sprocket for worn or dam­
aged gear teeth.
NOTE
The drive chain and drive sprocket must also
be inspected if the driven sprocket is worn.

REAR WHEEL DISASSEMBLY

Remove the dust seal, bearings and distance collar.
NOTE
Do not forget to install the rim band when the
tire and tube are replaced.
REAR WHEE LIBRA KE/SUSPENSION
(1) GOOD
( 1)
(2)- REPLACE
13 -4