Table of Contents
Advertisement
Quick Links
users guide
Your Ideal users guide
See reverse for
Models F90, F140, F180
& F220, F270, F310
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require. Do not
use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
plus II
plus II
installation & servicing guide
ENGINEERED FOR PEACE OF MIND
Advertisement
Table of Contents
Related Manuals for IDEAL Imax Plus II F90
Summary of Contents for IDEAL Imax Plus II F90
- Page 1 When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification that we require. Do not ENGINEERED FOR PEACE OF MIND use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
-
Page 2: Maintenance
2. Do not obstruct ventilation ducts, grilles or openings in the boiler room, or the passage of combustion and ventilation out to the boiler. Natural Gas only PI No. 1312 BR 4912 3. Do not store objects around or on the boiler, and keep access clear at all times. - Page 3 CONTROLS OPERATION AND DISPLAY CONTD During normal operation of the imax plus II, the status of the appliance can be determined from the display. Display Status Boiler Status 0_xx Standby: no heat request 1_xx The fan of the burner to be ignited is running in prepurge 2_xx The safety time of the burner to be ignited is operative 3_xx...
- Page 4 PARA AND DATA ACCESS +/- : it selects : It d isp lays when it in cr eases - parameters in DATA mode. Reset or decr eases ch ooses - data (all/single) It st or es when the displ ayed the boile r the mo de - test (all/single)
-
Page 5: Data Mode
CONTROL OF WATER TEMPERATURE AND SYSTEM TYPES By pressing the mode key once, PARA mode (abbreviation for parameter) is displayed. In this mode it is possible to change the settings of the boiler control module. Press Display P A R A Parameters accessible to user Lower Upper... -
Page 6: Frost Protection
TO LIGHT THE BOILER BOILER LOCKOUTS When a burner module locks out, the corresponding red reset 1. Switch on the electricity supply to the boiler and check that all button illuminates on the fascia. If the entire boiler locks out, an external controls e.g. - Page 7 Users...
- Page 8 Ideal Stelrad Group pursues a policy of continuing improvement in the design and performance Ideal Consumer Helpline of its products. The right is therefore reserved to vary specification without notice. Tel: 01482 498376 Ideal Boilers, P.O. Box 103, National Ave, Kingston Upon Hull, HU5 4JN. Tel.