Wake-Up Resources - Fujitsu D3320 PRIMERGY BX2560 M2 Reference Manual

Power menu
ACPI Controlled
The switch on sources are managed by the ACPI operating
system.

Wake-up Resources

Calls a submenu used to make settings for Wake-Up Resources (see
"Wake-Up Resources" on page
6.1 Wake-Up Resources
LAN
Determines whether the system can be switched on via a LAN controller
(on the system board or expansion card).
Disabled
The system cannot be switched on via a LAN controller.
Enabled
The system can be switched on via a LAN controller.
Wake On LAN boot
Specifies the system behaviour when switched on by means of network
signals.
Boot Sequence
The system boots up according to the device sequence specified
in the Boot menu when switched on via LAN.
Force LAN Boot
The system is booted remotely via LAN when switched on via
LAN.
54
54).
D3320 - BIOS Setup Utility
BX2560 M2