Onboard Devices Configuration - Fujitsu D3320 PRIMERGY BX2560 M2 Reference Manual

Option ROM Configuration
Calls a submenu to enable or disable the legacy Option ROMs of the PCI
Express expansion cards (see
iSCSI Configuration
Calls a submenu used to configure a UEFI driver for a LAN controller
(see "iSCSI Configuration" on page
4.1

Onboard Devices Configuration

Opens the submenu to configure Onboard Devices. Some of them are only
available under special preconditions.
Onboard CNA
Specifies whether the CNA (converged network adapter) on the system
board is available.
Enabled
CNA on the system board is available.
Disabled
CNA on the system board is not available
Onboard CNA OpROM
CNAs (converged network adapter) may be used as boot devices if a
suitable option ROM was started during BIOS POST. This parameter
specifies whether an option ROM should be started for the CNA.
Enabled
Starts the option ROM for booting the CNA.
Disabled
No option ROM is started.
BX2560 M2
"Option ROM Configuration" on page
44).
D3320 - BIOS Setup Utility
Advanced menu
44).
17