Attaching The Mounting Brackets; Installing The System Into A Rack Or Cabinet - Dell Z9000 Manual

Attaching the Mounting Brackets

The Z9000 ships with mounting brackets (rack ears) and the required screws for rack or cabinet
installation. The brackets are enclosed in a package with the system.
Attach the brackets to the system as follows:
1. Take the brackets and screws out of their packaging.
2. Attach the brackets to both sides of the system using four screws for each bracket. Attach the
bracket so that the "ear" faces to the outside of the system.
1. View from PSU or I/O side
2. Connect to rack/cabinet (ears)

Installing the System into a Rack or Cabinet

Ensure that there is adequate clearance surrounding the rack or within the cabinet to permit access and
airflow.
To install the system into a two-post 19-inch equipment rack using the already attached mounting
brackets, follow these steps:
Install the Z9000
3. Screws
4. Connect to rack/cabinet (ears)
17