System Status; Led Displays - Dell Z9000 Manual

System Status

You can view Z9000 status information in several ways, including light emitting diodes (LEDs) and boot
menu options.
You can also view status information through the command line interface (CLI) show commands and
with simple network management protocol (SNMP) traps. For more information about these options,
refer to the Dell Networking OS Command Line Reference Guide for the Z9000 System and the Dell
Networking OS Configuration Guide for the Z9000 System.

LED Displays

The S4810–ON includes LED displays on the I/O side of the chassis (shown in the following illustration).
When the S4810–ON powers up or reloads, the PSU LED is solid green. For additional LED information,
refer to your third-party operating software documentation.
The S4810–ON system LEDs are:
• System status (SYS)
• Stack Master indicator (MASTER)
• Fan status (FAN)
• Power status (PSU)
Additionally, the PSUs and fans have LEDs that indicate their individual status:
• PSU status
• Fan tray status
• System
Figure 3. S4810–ON LEDs
1. SYS
The Z9000 System
9