Table of Contents
Advertisement
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total distance that the walking
belt has moved. The information mode also allows you
to select miles or kilometers as the unit of measure-
ment and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be dis-
played:
The priority dis-
play will show the
total number of
miles (or kilome-
ters) that the
walking belt has
moved. The
lower right corner
of the display will
show the total number of hours that the treadmill has
been operated. An "E" for English miles or an "M" for
metric kilometers will appear in the lower left corner of
the display. Press the Speed + button to change the
unit of measurement if desired.
IMPORTANT: If a
"d" appears in the
lower left corner
of the display, the
console is in the
"demo" mode.
This mode is in-
tended to be used
only when a
treadmill is displayed in a store. When the console is in
the demo mode, the power cord can be plugged in, the
key can be removed from the console, and the indica-
tors in the display will automatically appear in a preset
sequence; the buttons on the console will not operate. If
a "d" appears when the information mode is se-
lected, press the Speed – button so "d" disappears.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor offers hands-free op-
eration and enables you to use the console's pulse
programs. To purchase the optional chest pulse
sensor, call the toll-free telephone number on the
front cover of this manual.
19
Advertisement
Table of Contents
