Toshiba Encore 10 User Manual page 37

California Prop 65 Warning
To connect AC power to the device:
1 Plug the USB Power cable into the Micro USB port on
the device.
NOTE
NOTE
Connecting to a power source
Always confirm that the Micro USB/AC adaptor (and
extension cable plug if used) has been fully inserted into
the socket, to ensure a secure electrical connection.
Failure to do so may result in a fire or electric shock,
possibly resulting in serious injury.
Be careful if you use a multiple connector. An overload on
one socket could cause a fire or electric shock, possibly
resulting in serious injury.
Always use the TOSHIBA Micro USB/AC adaptor that
was provided with your device, or use Micro USB/AC
adaptors specified by TOSHIBA to avoid any risk of fire
or other damage to the device. Use of an incompatible
Micro USB/AC adaptor could cause fire or damage to the
device possibly resulting in serious injury. TOSHIBA
assumes no liability for any damage caused by use of an
incompatible adaptor.
This product contains chemicals, including lead, known to
the State of California to cause cancer and birth defects or
other reproductive harm.
Never attempt to connect or disconnect a power plug
with wet hands. Failure to follow this instruction could
result in an electric shock, possibly resulting in serious
injury.
To locate your Micro USB port, please refer to your Quick
Start document.
Do not force the plug into device.
Getting Started
Wash hands after handling.
37