Subaru FORESTER Manual page 58

1-34
Seat, seatbelt and SRS airbags
You will find the marks " " on the cover at
the bottom of the rear seat seatbacks.
These marks indicate the positions of the
ISOFIX anchor bars.
Each anchor bar is located where the seat
cushion meets the seatback.
1. Use the " " marks to locate the two
anchor bars for the position where you
want to install the child restraint system.
2. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the connectors of the
child restraint system to the anchor bars.
When the connectors are fastened, make
sure that the adjacent seatbelts are not
caught.
3. Before seating a child in the child
restraint system, try to move it back and
forth and right and left to verify that it is
held securely in position.
If the child restraint system requires a top