Husqvarna J-handle barrier 536LiLX Operator's Manual page 2

Hide thumbs Also See for J-handle barrier 536LiLX:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Contents
CONTENTS
Contents ............................................................... 2
Note the following before starting: ........................ 2
WHA T IS WHAT?
What is what? ....................................................... 3
SAFETY INSTR UCTIONS
Cutting equipment ................................................. 4
Sharpening grass knifes and grass blades ........... 4
General working instructions ................................ 5
ASSEMBLY
Fitting the J-handle .............................................. 6
Fitting the suspension ring .................................... 6
Assembling the cutting equipment ........................ 6
Assembly of grass blade and grass cutter ............ 7
STARTING AND STOPPING
Check before starting ............................................ 8
Starting and stopping ............................................ 8
TECHNICAL DATA
Technical data ....................................................... 10
2 – English
CONTENTS
Note the following before
starting:
Translation of the original Swedish operating instruction.
Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine. These instructions supplement the instructions
that were included with the machine. For other
procedures, please refer to the operating instructions for
the machine.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
!
!
!
IMPOR TANT! Never use a cutting attachment without
an approved guard. See the chapter on Technical data.
If an incorrect or faulty guard is fitted this can cause
serious personal injury.
IMPORTANT! Wear boots with steel toe-caps and non-
slip sole if a grass blade is fitted to the machine.
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use original
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
WARNING! This accessory may only be
used together with the intended trimmer,
see under heading "Approved
accessories" in chapter Technical data in
the machine's Operator's Manual.
WARNING! Only grass blades/grass
cutters or trimmer heads/plastic blades
may be used when the J-handle is fitted.
Saw blades must never be used with the
J-handle.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents