Table of Contents
Advertisement
CP Drill
D.
The CE symbol means that the machine is
EC-approved. See the EC Declaration of
Conformity which is delivered with the
machine for more information.
Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
Warning label
To reduce the risk of injury, everyone using,
installing, repairing, maintaining, changing
accessories on, or working near this tool must read
and understand the safety instructions before
performing any such task.
Operate with chisel retainer in place.
Emission compliance label
EMISSION CONTROL INFORMATION
Construction Tools PC AB
THIS ENGINE MEETS U.S EPA EXH/EVP REGS FOR XXXX. This engine
is certified to operate on regular unleaded gasoline mixed with two
stroke oil at a 50:1 ratio. Exhaust emission control system: OC
Engine Family: XXXX
EMISSION COMPLIANCE PERIOD: 300 HOURS
Date of manufacture:
Emissions compliance period referred to on the label
indicates the number of operating hours for which
the engine has been shown to meet Federal
emissions requirements.
9800 1669 01 | Original instructions
Safety and operating instructions
Transport
WARNING
Fuel hazard
The fuel (petrol and oil) is extremely flammable and
petrol fumes can explode when ignited, causing
serious injury or death.
Empty the tank before transport.
►
Let the machine cool down before transport.
►
Installation
Fuel
Two-stroke oil
The fuel is petrol with a 2% oil mixture (1 part oil to
50 parts petrol). Always use high quality lead-free
petrol (non-alkylat).
For the best lubricating results use Atlas Copco s
environmentally friendly two-stroke oil, which has
been specially developed for Atlas Copco s petrol
engined hammering and rock-drilling machines.
If Atlas Copco s two-stroke oil is not available, use
a high quality two-stroke oil for air-cooled engines
(not two-stroke oil for outboard engines). Contact
your local Atlas Copco representative for advice on
the correct two-stroke oil.
Mixing the petrol and oil
Always mix the petrol and oil in a clean petrol can.
First add the oil and then the correct amount of
petrol. Then shake the can thoroughly. Shake the
can before every refilling.
NOTICE
During long term storage of two-stroke
mixture, the oil and petrol can separate. Never mix
more fuel than you intend to use within two weeks.
Filling
WARNING
Fuel hazard
The fuel (petrol and oil) is extremely flammable and
petrol fumes can explode when ignited, causing
serious injury or death.
Protect your skin from contact with the fuel.
►
►
Never remove the filler cap and never fill the fuel
tank when the machine is hot.
Never smoke when filling the fuel tank or when
►
working with the machine or servicing it.
Avoid spilling fuel and wipe off any fuel spilled
►
on the machine.
►
Fill the fuel tank outdoors or in a clean and well
ventilated place, free from sparks and open
flames.
13
Advertisement
Table of Contents
