Clarity XLC7BT User Manual page 33

XLC7BT
Your handset screen is displaying "Searching...":
• Verify that the AC adapter is plugged into the base and into the wall
outlet.
• The handset is out of range or the power to the base is unplugged.
• Move closer to the base.
• Place the handset into the base until the screen returns to standby
mode. It will take approximately 5-10 seconds for the handset to
register to the base.
• Handset may need to be re-registered to the base manually. Follow
instructions on page 27.
Screen displays "Battery Low":
• Handset batteries are low on charge; return the handset to the base to
rechargw the batteries.
TALK button is blinking green (fast pace):
• The base is trying to locate the handset; press TALK to end the FIND
paging process and return the handset to the base.
Base POWER light blinks green once every second:
• The power adapter may not be plugged in. Verify AC adapter is plugged
into proper wall outlet.
Base POWER light blinks green every five seconds:
• The power adapter may not be plugged in. Verify AC adapter is plugged
into proper wall outlet.
• The base batteries may be "low" (their charge). If necessary, replace
batteries.
XLC7BT User Guide RevB.indd 31
TROUBLESHOOTING
E
N
G
L
I
S
H
31
9/18/17 11:18 AM