Clarity XLC7BT User Manual page 26

MENU - RINGER SETUP
XLC7BT
In standby mode, press MENU, then scroll to select "Ring Setup"; press
MENU to enter the ringer setup. You will see the available options for your
ringer.
From here, choose one of the paths described below - for both the home
and the cellphone lines:
Ringer Vol:
In order to adjust the ringer volume, the RINGER ON / OFF switch on the
side of the XLC7BT handset must be set to the ON position. Use UP or
DOWN to reach the desired level of ring loudness. When finished, press
MENU to save your setting.
Screen will display "OK" and you will hear five beeps.
If the RINGER ON / OFF switch is set to OFF, the screen displays "Ringer Off"
(middle of screen) with no sound made. Turn ringer volume switch ON or
return phone to standby.
Ringer Tone:
To adjust the ringer tone, press DOWN to advance the row that reads
"Ringer Tone" to the top of the screen. Press MENU to select this option.
Use UP or DOWN to scroll through the available ring tones.
Press MENU to save the setting you selected. Screen will display "OK" and
you will hear five beeps.
Keypad Tone:
To turn the keypad tones high, low or off, press DOWN twice to advance
the row that reads "Keypad Tone" to the top of the screen. Press MENU to
select this option.
Use UP or DOWN to make your selection. Press MENU to save. Screen will
display "OK" and you will hear five beeps.
MENU - VISUAL RINGER (Handset)
XLC7BT
In standby mode, press MENU.
Press UP or DOWN to advance the row that reads "Visual Ring".
Press MENU to enter the handset visual ringer On / Off setup.
Use UP or DOWN to make your selection. Press MENU to save your
selection. Screen will display "OK" and you will hear five beeps.
NOTE: This option refers to the handset visual ringer only.
24
XLC7BT User Guide RevB.indd 24 9/18/17 11:18 AM