Settings - Coby CD-RA195 Operating Manual

3. Press to change the setting." --- " will begin
flashing.
4. Use the dial pad to enter the three digit area code that your phone number begins with.
5. When the setting you desire is displayed, press
to confirm the setting has been saved.
6. Continue with programming or press
Adjusting the Contrast
The contrast is optimized for viewing and will probably not need to be changed from the default
setting. It will adjust the display background lighter or darker.
1. Press and hold the key to enter the menu .
2. Press to go to the contrast programming option.
3. Press to change the setting. "2" will begin flashing.
4. Use the keys to toggle between the three levels of contrast.
5. When the setting you desire is displayed, press
to confirm the setting has been saved.
6. Continue with programming or press
Setting the PBX Number
1. Press and hold the key .
2. Press to go to the PBX number programming option.
3. Press to change the setting.
4. Use the keys to customize the digit to match your PBX system.
5. When the setting you desire is displayed, press
sound to confirm the setting has been saved.
6. Continue with programming or press
Note : The number programmed here is not active unless PBX mode is On.
Turning PBX Mode On or Off
1. Press and hold the key .
2. Press to go to the PBX mode programming option.
＂
3. Press to change the setting. On
4. Use the keys to toggle between On and Off.
5. When the setting you desire is displayed, press
to confirm the setting has been saved.
6. Continue with programming or press
Note: You do not need PBX mode unless you need to dial A specific single digit number before
each outgoing call.
Changing the Pause Time
1. Press and hold the key to enter the menu.
2. Press to go to the pause time programming option.
3. Press to change the setting. 2 will begin flashing.
4. Use the keys to select the desired dialling delay.
5. When the setting you desire is displayed, press
to confirm the setting has been saved.
6. Continue with programming or press
Deleting Message Waiting Indication
Clears any current message waiting indication. See pag
message waiting.
1. Press and hold the key to enter the menu.

SETTINGS

to save the setting. A double beep will sound
to return to the idle screen.
to save the setting. A double beep will sound
to return to the idle screen.
to save the setting. A double beep will
to return to the idle screen.
＂
will flash.
to save the setting. A double beep will sound
to return to the idle screen.
to save the setting. A double beep will sound
to return to the idle screen.
e 18-19 f or more information about
19
2. Press to go to the message waiting programming option.
3. Press to reset the message waiting indication. "
4. Press to delete the indication. A double beep will sound to confirm.
5. Continue with programming or press
Turning Auto Answer On or Off
Turn on and off the auto answer feature. When on, the phone will automatically answer an
incoming call if the handset is in the base.
1. Press and hold the key to enter the menu.
2. Press to go to the auto answer programming option.
3. Press to change the setting. " n" will flash. O
4. Use the keys to toggle between On and Off.
5. When the setting you desire is displayed, press
to confirm the setting has been saved.
6. Continue with programming or press
Disabling the Ring for Private Calls
Turns the ringer on and off for all calls where the caller has blocked their caller ID.
1. Press and hold the key to enter the menu.
2. Press to go to the private ring programming option.
3. Press to change the setting. " n" will flash. O
4. Use the keys to toggle between On and Off.
5. When the setting you desire is displayed, press
sound to confirm the setting has been saved.
6. Continue with programming or press
Note: The phone will ring once when set to
Disabling the Ring for Unavailable Calls
Turns the ringer on and off for all calls where caller ID information is unavailable.
1. Press and hold the key to enter the menu.
2. Press to go to the unavailable ring programming option.
3. Press to change the setting." n" will begin Flashing. O
4. Use the keys to toggle between On and Off.
5. When the setting you desire is displayed, press
to confirm the setting has been saved.
6. Continue with programming or press
Note: The phone will ring once when set to Off
The CT-P9050 will store up to 20 speed dial numbers in the order that they are programmed. No
duplicate numbers can be stored.
Storing Phone Numbers
1. With the handset in the idle state, press
2. Press to create a new phone book entry.
SETTINGS
DELETE " will begin flashing.
to return to the idle screen.
to save the setting. A double beep will sound
to return to the idle screen.
to save the setting. A double beep will
to return to the idle screen.
＂ ＂
Off unless First Ring is also set to
to save the setting. A double beep will sound
to return to the idle screen.
"
" " unless First Ring is also set to Off .
SPEED DIALING
.
20
＂ ＂
Off .
" "