Joint - Epson L1800 Service Manual

L1800

3.7.3.2 Joint

Ink Supply Tube
0.5 mm or less
Joint
0.5 mm or less
Ink Supply Tank Tube
Ink Supply Tube
Make sure the red lines of the Ink Supply Tank Tube and Ink Supply Tube facing

upward.
When attaching the Joint, align the cutout of the Joint with the rib of the Ink Supply

Tube Guide 1st.
Make sure the gaps between the end of Ink Supply Tank Tubes or Ink Supply Tubes

and the Joint are 0.5 mm long or less.
When connecting the Ink Supply Tank Tube to the Joint, take care noto to connect it

to a wrong joint.
Disassembly And Assembly
Joint
Cutout
Joint Ink Supply Tube Guide 1st
Rib
Disassembling the CISS section
3.7.4 Ink Supply Tank Assy section
3.7.4.1 Valve Position Label
Valve Position Label
7.5 mm
Attach the Refilling Ink Label and Valve Position Label according to the standards
shown in the figure above.
Revision A
7.5 mm
6.4 mm
105
Confidential