Assembly - ProForm 831.299210 User Manual

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Extension Leg Screw (53)–2
1. With the help of a second person, carefully raise the
Uprights (11) until the treadmill is in the position shown.
2. Insert one of the Extension Legs (34) into the treadmill
as shown. Note: It may be helpful to tip the Uprights (11)
in the direction shown by the arrow as you insert the
Extension Leg. Make sure that the Base Pad (40) is on
the indicated side of the Extension Leg. Using the Allen
Wrench (74), attach the Extension Leg with an
Extension Leg Screw (53). Be sure to push on the
head of the Extension Leg Screw while tightening it.
Next, attach the other Extension Leg (34) in the same
way.
.
Handrail Screw (33)–2
1
2
5
Latch Screw (35)–2
11
11
74
53
34
40