Fujitsu ETERNUS DX Configuration Manual page 6

Chapter 1 Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX/AF
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF.
"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 11)
•
"Chapter 6 Setting Up the ETERNUS DX/AF" (page 12)
•
Checking the setup and maintenance operations
•
"ETERNUS Web GUI User's Guide"
-
• Installing ETERNUSmgr
"ETERNUSmgr Install Guide"
-
Checking the ETERNUSmgr operational procedures
•
- "ETERNUSmgr User Guide"
Setting up the ETERNUS DX/AF
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
-
NUS DX/AF to be connected
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
"Chapter 7 Setting Up the Fibre Channel Switches" (page 13)
•
• Setting up the Fibre Channel switches
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
-
Checking the Fibre Channel switch connection requirements
•
"Server Support Matrix for FC-SWITCH"
-
Setting Up Oracle VM Server
Set up Oracle VM Server to connect to the ETERNUS DX/AF.
• "Chapter 8 Setting Up Oracle VM Server" (page 15)
Setting up Oracle VM Server and the Fibre Channel card
•
"8.1 Setting Up the Fibre Channel Cards" (page 15)
-
Checking the Fibre Channel card driver versions
•
"Server Support Matrix"
-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
6
Copyright 2017 FUJITSU LIMITED
P3AM-6612-14ENZ0