Creating An Initial Ram Disk - Fujitsu ETERNUS DX Configuration Manual

Chapter 8 Setting Up Oracle VM Server
8.2 Turning On the Devices
8.1.3

Creating an Initial RAM Disk

Create an initial RAM disk image file to match the kernel being used. Refer to manuals supplied with the
Fibre Channel cards for details.
8.1.4 Rebooting the OS
Reboot the OS.
8.2 Turning On the Devices
To turn on the connected devices, use the following procedure:
1
Turn on the Fibre Channel switch power (if used).
2
Check that the Ready LED (or equivalent) is lit on the Fibre Channel switch.
3
Turn on the ETERNUS DX/AF.
4
Check that the Ready LED is lit on the ETERNUS DX/AF.
5
Turn on the server.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
20
Copyright 2017 FUJITSU LIMITED
P3AM-6612-14ENZ0