Fujitsu ETERNUS DX Configuration Manual page 18

Chapter 8 Setting Up Oracle VM Server
8.1 Setting Up the Fibre Channel Cards
HBA Parameter Settings List displayed in the [Host Adapter Settings] window or [Adapter Settings]
•
window
Parameter
Host Adapter BIOS
Frame Size
Loop Reset Delay
Adapter Hard Loop ID
Hard Loop ID
Spinup Delay
Connection Options
Fibre Channel Tape Support
Data Rate
*1: Use the following "Data Rate" setting values
5
Select [Advanced Adapter Settings].
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
Fibre Switch connection
Channel
Fibre Channel switch transfer rate
card
transfer
32Gbit/s 16Gbit/s
rate
8Gbit/s 4 4
4Gbit/s — 3
2Gbit/s — —
Copyright 2017 FUJITSU LIMITED
Setting value
2Gbit/s Fibre 4Gbit/s Fibre
Channel card Channel card
Disabled
2048
5
Disabled
0
Disabled
0 (direct connection)
1 (switch connection)
Disabled
(*1)
8Gbit/s 4Gbit/s 2Gbit/s
4 3 1
3 3 1
1 1 1
18
Remarks
8Gbit/s Fibre
Channel card
If the current pa-
rameter values
are different,
change them to
the indicated
values.
Determined by
the connection
method.
If the current pa-
rameter values
are different,
change them to
the indicated
values.
Direct connection
CA transfer rate
1Gbit/s 8Gbit/s 4Gbit/s
— 4 3
0 3 3
0 1 1
P3AM-6612-14ENZ0