Update software
To improve product performance, Philips may
offer you new software for you to update your
audio adapter.
Warning
•
Always connect your audio adapter to AC power for
firmware upgrade. Never power off your audio adapter
nor close the app during firmware upgrade.
1
Make sure that audio adapter is powered
on and connected to the same Wi-Fi
network as your smartphone or tablet.
2
Make sure that your home Wi-Fi network
is connected to the Internet.
3
Run SpeakerSet on your iOS or Android
smartphone or tablet.
4
Tap the image of the audio adapter to see
the available options.
20
EN
5
Tap Software update to enter the software
update page.
6
Tap Check online to see whether any new
version of software is available.
7
If a new version is available, tap Update to
start software update.
» The system status indicator on the
front panel blinks amber and red
alternately during this process.
8
Wait until the software update process
finishes, then tap OK to reboot the audio
adapter.
Tip
•
Depending on the network connection, it may take 10
minutes to finish update.