Table of Contents
Advertisement
8 Tools
Tools main menu
Use this menu, you can see the current informations of this Set
Top Box,Load Factory Setting, Update S/W and Remove USB
device safely.
1
Press the "MENU" button to enter main menu.
2
Press "UP" or " DOWN " button to highlight "Tools", press
"RIGHT" button to enter the Tools menu.
3
Press "UP" or "DOWN" cursor button to highlight the desired
item and press "OK" button to enter the sub-menu.
4
Press "EXIT" button to exit.
Tools
Information
Factory Setting
Software upgrade by OTA
Software upgrade by USB
Remove USB device safely
Upgrade By Network
Information
You will find here important information about the hardware
and embedded software.
1
In "Tools" menu, select "Information", press "OK" button to
open information window.
2
Press "EXIT" button to exit.
Information
Receiver
Hardware
Software
Software version
Build Date
Factory Setting
This menu allows you to re-set the Set-top box back to factory
settings,clear all existing channels.
1
In the "Tools" menu, select "Load Factory Setting", press
"OK" button.
You are asked to input a password(the default password
is"0044" or "3327").
2
A confirmation window is displayed.
Select "Yes" to return back to factory settings and clear all
channels.
Select "No" to cancel back to factory settings.
20
M3626
MC6624-VER1.0
DTR3202
H265 V1.0.8
Mar 23 2016
3
Press "EXIT" button to exit .
Factory Setting
This operation will load default settings and erase all
existing channels. Do you want to continue?
Yes
Software Update
We offer the functions for user to upgrade software version by
OTA or by USB .
1
Enter "Tools" menu, select "Software upgrade by OTA" or
"Software upgrade by USB", press "OK" button, Software
Upgrade menu is shown.
2
Press cursor button to select the desired item, then highlight
"Start" and press "OK" button to start upgrade.
3
Press "EXIT" button to exit.
Tools
Information
Factory Setting
Software upgrade by OTA
Software upgrade by USB
Remove USB device safely
Upgrade By Network
Remove USB device safely
This menu allows you to remove USB device safely.
1
In "Tools" menu, select "Remove USB device safely",
2
Press "OK" button to confirm. Then a window is displayed.
3
Press "OK" button again.
Tools
Information
Load Factory Setting
S/W Update by OTA
Upgrade By USB
Remove
Remove USB device safely
No
Disk Remove
USB Disk A-3 GB
OK
Cancel
Advertisement
Table of Contents
