Option 2: Set Up Through An Android Device - Philips SW100M User Manual

Option 2: Set up through an
Android device
1
Before setup, make sure that your Android
device is connected to your home Wi-Fi
network.
2
As instructed on the app, press and hold
SETUP on the back of the audio adapter
for more than 3 seconds.
» Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the SETUP button turns
solid amber.
3
Tap Next on the above app screen, and
then read how to proceed with network
setup.
4
Select Wireless (Wi-Fi) under HOW DO
YOU WANT TO CONNECT?.
5
Select the name of your home Wi-Fi
network under Select a network to use
speaker.
6
Enter the password of your home Wi-Fi
network, and then tap Done to finish
setup.
7
Wait until successful connection of
the audio adapter to your home Wi-Fi
network.
» The Wi-Fi status indicator on the
SETUP button turns off.
» The system status indicator on the
front panel turns solid green.
EN
11