Siemens Sinumerik 840C Diagnostics Manual page 133

04/96
120010 Error while generating alarm log
Scan
Log could not be created.
Effect
No log is displayed.
Explanation
The master control creates the logs when demanded by diagnosis
Remedy
Check the entry for the length of the logs in the configuration file of the master control and alter if necessary.
120011 Error on creating service log
Scan
Log could not be created.
Effect
No log is displayed.
Explanation
The master control creates the logs when demanded by diagnosis
Remedy
Check the entry for the length of the logs in the configuration file of the master control and alter if necessary.
120012 ... cannot be created
Scan
An error has occurred while creating the specified data object.
Effect
The object will not be created or only partially.
Explanation
–
Remedy
Delete a file, possibly there are too many files in this directory. Check position of keyswitch and capacity of hard
disk.
120013 No write access at this point
Scan
You have tried to store a file in the SIEMENS branch, or to store NC data in the user branch when keyswitch not in
position 1 or 2.
Effect
Data cannot be stored.
Explanation
Check the position of the keyswitch.
Remedy
Leave editor using RECALL key.
120014 ... not available
Scan
The specified file (e.g. PCF17) has not been found in the NCK.
Effect
None
Explanation
Existing PLC error messages can only be saved in the NC.
Remedy
Select a different program number for PCF file.
120015 Operating system – error ...
Scan
An error has been caused in an operating system call during data transfer.
Effect
System failure
Explanation
Operating system error [0x4005]
i.e.: no communication to NCK
Remedy
Inform service
120016 NCK password not set
Scan
An attempt has been made to transfer NC files to the NCK for which a password is required.
Effect
File is not transferred.
Explanation
None
Remedy
Set the password on the NCK side.

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
1–125