Assembly - ProForm 831.295550 User Manual

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included allen wrenches
rubber mallet
For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first
check to see if it has been pre-assembled. If a part is missing, call toll-free 1-888-533-1333.
Silver Ground
Screw (75)–1
3/4" Screw (2)–2
Star Washer
(101)–2
1. Make sure that the power cord is unplugged.
With the help of another person, carefully raise the
Uprights (69) to the vertical position. Orient one of the
Extension Legs (63) so that the Base Pad (61) is under-
neath it, and insert the Extension Leg into the treadmill
as shown. Note: It may be helpful to tip the Uprights as
you insert the Extension Leg.
Insert the other Extension Leg (63) in the same way.
, and adjustable wrench
1/2" Screw (48)–10
Base Pad
Screw (39)–6
Wheel Nut (32)–2
and your own phillips screwdriver
.
Handrail Bolt (37)–2
Wheel Bolt (64)–2
Lower Handrail Bolt (98)–2
1
6
69
63
61
,