Honeywell HLVR4 User Manual page 97

Figure 7-21 System Settings – Image
Here you can select the image quality and protocols for each channel.
Here you can set encode mode, quality and protocol for each channel.
You can select from the dropdown list.
•
FPS (PAL): there are several options: 1/2/3/6/12/25. (Some series
DVR only support 25f/s PAL.)
•
Data: there are two data modes: CBR/VBR.
•
Quality: There are six levels. The different data flux occupies
different bandwidth and the transmission image qualities are also
different. Among them, level 6 needs the widest bandwidth and can
reveal the best image quality. Please note you setup here only
applies for image quality in web or client end.
Honeywell
85