Honeywell HLVR4 User Manual page 46

Overview of Navigation and Controls
34
Figure 5-11 Motion Detection
•
Channel: select the channel you want to implement motion detection.
•
Record Channel: select the channel to activate recording function
once alarm occurred. Please make sure you have set MD record in
encode interface (Main Menu->Setting->Schedule) and schedule
record in manual record interface (Main Menu->Advanced->Manual
Record).
•
Tour: Here is for you to activate tour between different cameras.
•
Delay: when motion detection complete, system auto delays
detecting for a specified time. The value ranges from 10-300(Unit:
second).
•
PTZ Linkage: Click set button, the interface is shown as in
5-12.Here you can set PTZ Linkage for one or more channels.
•
Region: click "select" button to set motion detection region. See
above figure.
•
Sensitivity: there are six levels. The sixth-level is of the highest
sensitivity.
•
Alarm Out: when alarm occurred, system enables peripheral alarm
devices.
•
Show Message: System pops up message in the screen to alert you
once alarm occurred.
Figure