Table of Contents
Advertisement
When the system completes backup, you can see a dialogue box
prompting successful backup.
Click Backup, system begins burning. At the same time, the backup
button becomes stop button. You can view the remaining time and
process bar at the left bottom.
Figure 5-20 Backup in Process
Tips:
During backup process, you can click ESC to exit current interface; but the
system will not terminate backup process.
Note:
When you click Stop button during the burning process, there are two
conditions for different devices:
•
For CD/DVD burner device, the stop function becomes activated
immediately and there is no data in the burner.
•
For USB device, system can backup the data before you click Stop
button. For example, if there is a file of 10 minutes, when you click
stop after five minutes backup, system only save the previous 5-
minute data in the device.
The file name format usually is: SN_CH+channel number+time
Y+M+D+H+M+S. In the file name, the YDM format is the same as you set
in general interface. (Main Menu ->Setting ->General).You can visit our
website to view listed CD-ROM types.
Honeywell
41
Advertisement
Table of Contents
