Table of Contents
Advertisement
SETTING YOUR CYCLE
SELECTOR (TIMER) CONTROL
Use this control to choose the agitation
time and to start the washer.
• For heavy soil and sturdy fabrics,
use the full time.
• For light soil and delicate fabrics,
use less time.
PERMANENT PRESS
Benefit
for your
The PERMANENT PRESS Cycle
includes a load cooling process
that reduces wrinkling compared
to other cycles.
You can select up to 10 minutes of
wash time.
NOTE: When the timer reaches PAUSE,
the washer will drain and pause for no
more than two minutes while some of
the wash water is drained and replaced
with rinse water.
ULTRA CLEAN
Use this cycle for most loads to get
between 4 and 14 minutes of wash time.
SHORT
ULTRA CLEAN
SUPER
PREWASH
6
10
14
OFF
4
OFF
OFF
SOAK
SPIN
PUSH & TURN CLOCKWISE TO SET
PREWASH
Use this cycle to get up to 4 minutes
of agitation to help remove heavy soils
and stains that need pretreatment.
PREWASH Cycle should be followed
by an ULTRA CLEAN or PERMANENT
PRESS Cycle with additional detergent.
SOAK
SOAK Cycle features 4 minutes of
agitation followed by an unlimited soak
time to help remove heavy soils and
stains that need pretreatment. You will
need to reset the washer to a SPIN
setting to remove water. SOAK Cycle
should be followed by an ULTRA CLEAN,
PERMANENT PRESS, or PREWASH
Cycle with additional detergent.
NOTE: We do not recommend hot water
for soaking. It may set some stains.
RINSE
SPIN
OFF
2ND RINSE
SPIN
OFF
RINSE
OFF
SPIN
2ND
RINSE
PULL TO START
10
PERMANENT
PRESS
6
2
PAUSE
COOL DOWN
PUSH TO STOP
23
Advertisement
Table of Contents
