Future Expansion - Ericsson CME 20 R6.1 Reference Manual

Installation Scenario
To support the concept of a quick and smooth installation scenario, the
RBS installation work can be divided in to two steps:
•
•
However, the installation can be performed in one site visit.
The manual operations at installation are few and easy, this is valid also
when connecting external cables.
Site Installation Requirement
Free space is required around the RBS for installation and maintenance.
For a simple installation, the following distances are recommended:
•
•
•
•
For 4 and 6 TRX, the maximum distance between the cabinets is 5 m,
which is the length of the cable.
If external battery backup is used, the following distances are required:
•
•
5.8.11 Production
The concept for the RBS supports production according to customer
choice from the ordering information plan.
5.9

Future Expansion

5.9.1 Future Expansion Possibilities
•
EN/LZT 123 2697 R5A
1998-08-13
Preinstallation. Installation of the Mounting Base, antennas and
all necessary cabling ( AC mains, transmission and alarms).
Installation and Commissioning. Installation of the Cabinet
including all parts according to customer ordering.
Front: 1.0 m
Side: 0.25 m
Top: 0.5 m
Bottom: 0.5 m
Top: 0.7 m
Bottom: 0.7 m
The hardware of the RBS is prepared for the expansion of up to 4
and 6 TRX.
© Ericsson Radio Systems AB
— All Rights Reserved —
Product Specification for RBS 2302
71 (306)