Product Specification For Rbs 2301 - Ericsson CME 20 R6.1 Reference Manual

4 Product Specification for RBS 2301
This chapter will describes the architecture, and specifies the
characteristics and performance of the RBS 2301.
4.1 General
The RBS 2301 satisfies the need for 'hot spot' capacity in small areas,
such as part of a city centre or a shopping mall, as well as 'fill in'
coverage.
The main focus with this product is to reduce site cost and make it
easier for operators to find sites, which will ensure operator profitability
of a micro cell network.
To be able to support the idea of a small RBS that can be located
almost anywhere, some functional limitations has been made:
•
•
•
•
The RBS is designed to fulfil applicable parts of the GSM and JTC
specifications.
The weather-proof cabinet and design make it ideal for installation
indoor, outdoor, on poles, walls or mast.
Integral antennas can be ordered as omnidirectional or sector antennas,
except from this there is always a possibility to connect external
antennas.
The base colour of the RBS is Grey (NCS S2502-R), but there is a
possibility to order the front sun-shields in different colours, which will
make the RBS more discrete.
The RBS is built up by the following main physical units: Mounting
Base, Cabinet, Antennas and Sun-shield. This will support a routine of
installing the Mounting Base prior to the Cabinet arrival.
EN/LZT 123 2697 R5A
1998-08-13
Low output power.
No antenna supervision (VSWR).
No RF cable supervision.
No expansion possibility.
© Ericsson Radio Systems AB
— All Rights Reserved —
Product Specification for RBS 2301
37 (306)