Product Requirements - Ericsson CME 20 R6.1 Reference Manual

Indicators (LEDs)
Fault
Operational
Local mode
Reduced capacity
Test TRX1
Test TRX2
AC Power on
Battery fault
External alarm
Buttons
CPU reset
Local/remote mode
Test Operation
initiation
Switches
Battery
AC Mains
Barcode Sign
The barcode sign for product identification is readable without disturbing
the RBS function.
5.8

Product Requirements

5.8.1 Appearance
Ericsson products are designed to appear as one physical unit,
inconspicuous, pleasant and good-looking. The standard colour of the
RBS is Grey.
The front cover of the RBS which is designed as a sun-shield is
available in different colours to make the RBS even more inconspicuous.
There is an optional integrated antenna system which supports the idea
of the RBS and the antenna site as one unit.
5.8.2 Mechanical Structure
Replaceable Units
The RBS consists of the following replaceable units:
•
EN/LZT 123 2697 R5A
1998-08-13
One or more faults, equals BS fault.
At least one TRX operational.
RBS in local mode.
One of two TRXs operational.
Result from TRX1 test operation.
Result from TRX2 test operation.
AC Power is switched on to RBS.
Lowbattery DC voltage, battery absent.
One or more external alarm active.
connected/not connected
connected/not connected
Cabinet
© Ericsson Radio Systems AB
— All Rights Reserved —
Product Specification for RBS 2302
65 (306)