Porsche 928 S 1986 Driver Manual page 82

Auxiliary driving lamps
1. Remove screws from lamp surround and
remove surround.
2. Remove the lamp fixing screws (see arrows)
and pull out the complete lamp.
3. Remove cable socket and bulb retaining
spring. Refit new bulb ensuring that it sits
properly.
4. Refit bulb retaining spring and cable socket.
5. Refit the lamp and the fixing screws. Check
that the lamp functions and that it is properly
adjusted.
78
Front side light
The front side light is built into the outer auxi-
liary driving lamp.
1. Remove complete lamp, and then the side-
light bulb holder.
2. Refit new bulb and replace lamp.
3. Check function of light.
Front blinker light
1. Remove screws holding the lens, and re-
move lens.
2. Remove bulb from bulb holder, and fit new
bulb.
3. Replace lens, and refit screws, tightening
gradually in sequence.
4. Check function of light.