Cigarette Lighter - Porsche 928 S 1986 Driver Manual

Black arrows: Jacking points for vehicle jack
White arrows: Lifting points for inspection platform or workshop jack
Order of working
1. Loosen front wheel nuts slightly.
2. Insert the car jack, with it tilted slightly away
from the bodywork, in the respective jacking
point (black arrow).
72
Jack the car up until the wheel to be chang-
ed is clear of the ground.
Remove wheel nuts, remove wheel and
mount the spare wheel.
5. When replacing the wheel nuts, do not
tighten too hard yet, and make sure that the
round surfaces of the nuts sit properly in the
depressions in the wheel, which should be
clean.
6. Screw the compressor hose first onto the
tyre valve, then plug the compressor into the
cigarette lighter socket. The necessary tyre
pressure is reached in a few minutes.
7. Check the pressure with pressure gauge.
8. Let the car down from the jack, and remove
jack. Tighten the wheel nuts.
After changing a wheel, the wheel nut
torque must be checked with a torque
wrench as soon as possible. (Tightening
torque 130 Nm, 94 ftlb.)