Porsche 928 S 1986 Driver Manual page 44

Headlight beam regulator
The height of the headlight beams can be re-
gulated to the laden condition of the vehicle
with the knob (B). This enables maximum
road illumination without dazzling other road
users.
The normal headlight beam setting is obtain-
ed by turning the rotary knob as far as the
noticeable stop, i. e. the white dot must be
in line with " 0 " (see also "Headlight adjust-
ment").
The beam setting must be corrected as shown
in the table when the vehicle load is increased.
40
Position
Turning the knob clockwise raises the beam
and vice versa. The correction should be
checked by observing the dipped beam cut-off
(e. g. on the back of the vehicle driving ahead
of you).
Load condition
1 - 2 persons
4 persons (luggage up to permissible
rear axle load)
2 persons and luggage up to permissible
rear axle load
1 person and luggage up to permissible
rear axle load
Loudspeaker fader control
The volume of the loudspeakers in the door
and in the rear of the vehicle can be balanced
by turning the loudspeaker fader control
knob (A).
Luggage compartment door
release
If either the driver's or passenger side door is
open, the luggage compartment door can be
electrically unlocked by pulling the knob (C)
from either the driver's or passenger side.