Technical Data - Hilti SR 30-A36 Manual

Blade holder
@
Mount for cutting assist
;
Folding scaffold hook (accessory)
=
Speed preselection
%
Transport lock
&
Control switch
(
Rear grip
)
Battery state of charge indicator
+
3.2 Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only Hilti battery chargers from the C4/36 series for these batteries.
3.3 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes containing liquids.
▶ Do not saw into unknown materials.
3.4 Lithium­ion battery status display
The Li-ion battery state of charge and malfunctions of the power tool are indicated by the display on the Li­ion
battery. The Li­ion battery state of charge is displayed after pressing one of the two battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.
3.5 Items supplied
Reciprocating saw, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4

Technical data

Rated voltage
Weight in accordance with EPTA procedure 01
Stroke rate (Stage 1)
Stroke rate (Stage 2)
Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00
Battery release button
§
Battery
/
Front gripping area with locking button for
:
contact shoe
Saw blade release lever
∙
Dust removal adapter
$
Contact shoe
£
Saw blade
|
Cutting assist (accessory)
¡
Meaning
• State of charge: 75 % to 100 %
• State of charge: 50 % to 75 %
• State of charge: 25 % to 50 %
• State of charge: 10 % to 25 %
• State of charge: < 10 %
• The battery has overheated or is completely
discharged.
• The power tool is overloaded or has overheated.
SR 30-A36
36 V
5.2 kg
2,500 /min
2,800 /min
English 7