Advertisement
Quick Links
Advertisement
Related Manuals for Hilti SR 30-A36
Summary of Contents for Hilti SR 30-A36
- Page 1 SR 30-A36 English Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00...
- Page 2 Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00...
- Page 3 Wireless data transfer Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
- Page 4 ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information Reciprocating saw SR 30-A36 Generation Serial no.
- Page 5 ▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. ▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 6 Additional safety instructions for saws Personal safety ▶ Keep your hands away from the cutting area and the blade. Keep your second hand on the auxiliary handle or the motor housing. When both hands are on the saw they cannot be injured by it. ▶...
- Page 7 ▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable location, well away from flammable materials, where it can be kept under observation and allowed to cool down. Contact Hilti Service after the battery has cooled down. English...
- Page 8 Description Product overview English Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00...
-
Page 9: Technical Data
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section. Items supplied Reciprocating saw, operating instructions. Other system products approved for use with this product can be found at your local Hilti Store or at: www.hilti.group | USA: www.hilti.com Technical data... -
Page 10: Preparations At The Workplace
SR 30-A36 Stroke length 32 mm Blade holder 0.5 in Noise information and vibration values in accordance with EN 62841 The sound pressure and vibration values given in these instructions were measured in accordance with a standardized test and can be used to compare one power tool with another. They can also be used for a preliminary assessment of exposure. - Page 11 Removing the battery 1. Press and hold down the two release buttons. 2. Pull the battery back and out of the product. Removing the saw blade 1. Activate the transport lock or separate the battery from the power tool. 2. Push the locking lever up as far as it will go and hold it in this position. 3.
- Page 12 1. Remove the battery. → page 9 2. Remove the saw blade. → page 9 3. Pull the rectangular plastic pin forward. It is between the two contact shoe guide pins. 4. Pull the contact shoe out. 5. Press the rectangular plastic pin back into the original position. 6.
- Page 13 Installing the scaffold hook (accessory) 1. Engage the transport lock. 2. Install the scaffold hook. Inserting the saw blade Use only saw blades with a 1/2" connection end. 1. Activate the transport lock or separate the battery from the power tool. 2.
- Page 14 • Do not operate the cordless tool if signs of damage are found or if parts malfunction. Have the tool repaired by Hilti Service immediately. • After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
-
Page 15: Troubleshooting
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information. - Page 16 ▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting. ▶ Dispose of your battery out of the reach of children. ▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public health and safety resources for disposal instructions.
- Page 17 Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00...
- Page 18 Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00...
- Page 19 Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00...
- Page 20 Hilti = registered trademark of Hilti Corp., Schaan 20180116 Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00...