1. Remove the battery. → page 9
2. Remove the saw blade. → page 9
3. Pull the rectangular plastic pin forward.
It is between the two contact shoe guide pins.
4. Pull the contact shoe out.
5. Press the rectangular plastic pin back into the original position.
6. Insert the lightly greased contact shoe fully into the guide.
7. Check that the contact shoe has engaged.
5.4
Installing the dust removal adapter (accessory)
1. Pull the contact shoe out.
2. Set the dust removal adapter on the contact shoe mount.
3. Insert the lightly greased contact shoe fully into the guide.
10
English
Printed: 02.02.2018 | Doc-Nr: PUB / 5398518 / 000 / 00